• Snap cases are made of hard plastic (polycarbonate).
• Tough cases are dual-layer, made of shock-absorbing TPU inside and a hard plastic (polycarbonate) shell on the outside. These two parts are designed to be separate, but when fitted on the phone, they provide a tight grip.
• Elite cases are made of Cutting-edge CloudGuard technology, a dot-pattern finish on the sides, and microfibre lining to prevent scratches from within.

Our inks consist of:

• ~98% water
• 2% pigments

Ecofriendly = free from Alkylphenol ethoxylates (APE)

SlimFit

• Weight: ~14–22g (iPhone 13 Mini – 13 Pro Max)
• Thickness: ~1.0mm
• Edges: nearly flush with the phone; only the camera area is slightly raised for lens protection
• Protection level: Low
• Main features: ultra-thin, body-hugging profile, precision cutouts, MagSafe Compatible

UltraGuard

• Weight: ~48–58g
• Thickness: ~2.8mm
• Edges: 1.5mm raised bezels around screen and camera
• Protection level: High (rated for drops up to ~2m/6ft)
• Main features: dual-layer TPU+PC shock-absorbing construction, textured non-slip grip, raised screen/camera bezels, MagSafe compatible

Airframe

• Weight: ~20–28g
• Thickness: ~1.4mm
• Edges: reinforced corner bumpers; open/semi-transparent back panel
• Protection level: Low–Medium
• Main features: aircraft-grade aluminum-look frame, cutout back showcases the phone's original finish, shock-absorbing corner pads, lightweight

Swap Mode

• Weight: ~30–38g (base shell, excluding swap panels)
• Thickness: ~1.6mm
• Edges: 1mm raised edges
• Protection level: Medium
• Main features: magnetic quick-swap back panels for changing designs without removing the case, MagSafe-certified magnet ring, reinforced base shell, wireless charging compatible

These are drafted estimates modeled on your reference format — get them checked against actual measured samples before publishing, since the numbers aren't from real product testing yet.

All of our cases have a raised bezel around the camera, so your phone's lens won't touch flat surfaces while the phone is on its back.

Yes. But only on Apple devices and some Samsung Galaxy models that support MagSafe®.

Our SlimFit, UltraGuard, AirFrame come in both MagSafe® compatible and non-compatible options. Make sure to double-check before adding to your cart.

SwapMode Cases are all MagSafe® compatible.

All cases don't contribute to phone heating. If your phone is heating, it’s likely due to internal processes, app usage, charging, or environmental conditions.

Yes. Our cases are made from BPA-free plastic and are recyclable, so they can have a second life instead of ending up in landfills.

Additionally, the sublimation inks we use are water-based, so they don't affect the recyclability of the material.

Our cases are created by our internal team of graphic designers who are highly passionate about the latest trends in fashion and style. The product is designed, assembled, and crafted with strict quality control at every step.

You can use a mild soap or dishwashing liquid mixed with warm water. Gently scrub the case with a soft cloth or sponge without putting any pressure. Rinse thoroughly with water and allow it to dry completely before putting it back on your phone.

We recommend avoiding any harsh chemicals, alcohol, disinfectant wipes or abrasive cleaners as they could damage the print of the case.

We make cases for all iPhones starting from iPhone 6, for all Samsung Galaxy phones starting from S8, and others such as Huawei and Xiaomi

Phone cases are specifically designed to fit the dimensions, button placements, camera cutouts, and other specific features of a particular phone model. Different phone models vary in size, shape, button configurations, and camera placements, making it impossible for a case made for one model to fit properly on another model.